Lesson 5 · 5 min
Sunlight & irradiance: how much sun reaches your site
Sunlight strength is measured in W/m². Add it up over a day and you get peak sun hours.

Irradiance is how strong the sunlight is right now, measured in watts per square meter (W/m²). On a clear day at noon, about 1000 W/m² of sunlight lands on each square meter facing the sun. At sunrise and sunset it is close to zero.
Because the sun rises, climbs and sets, the strength follows a hill-shaped curve through the day. The total sunlight energy of the day is the area under that curve, measured in kWh per square meter.
Peak sun hours squeeze that whole area into a simple rectangle: 'how many hours of full 1000 W/m² sun would give the same energy?' A day with 6 peak sun hours delivers 6 kWh on every square meter. Installers use that single number to size a system.
Try it yourself
Drag the sliders and watch the animation and numbers change.
Worked example
On a clear summer day in Riyadh the sunlight peaks at about 950 W/m² and the sun is up for 12 hours. How many peak sun hours is that?
- PSH = peak × day length × 2/π ÷ 1000
- = 950 W/m² × 12 h × 0.637 ÷ 1000
- = 7.26 h
What this means: That day is worth about 7.3 hours of full sun, so 1 kW of panels could make roughly 7.3 kWh before losses.
Quick check
Pick an answer to see at once whether it is correct.