
The ATS monitors the mains supply; when voltage or frequency goes out of range it sends a start signal to the generator and transfers the load once the set is stable, then switches back after the grid returns. A 4-pole switch also transfers the neutral, which is required when the generator neutral is earthed separately. In PV systems the inverter must see the generator as a weak source. Never connect a grid-tied inverter to a genset bus without a controller that limits PV output. Sizes from 63 A to 3200 A; the price shown is for a 250 A unit (IEC 60947-6-1, class PC).
Industrial genset for factories, camps, mines and PV-diesel microgrids; synchronizable for parallel operation.

Coordinates PV inverters with generators to maximize solar share while protecting gensets from reverse power and low load.