
This is the sweet spot of the all-black range: the same handy 1722 × 1134 mm footprint as the 400 W version, but with higher-grade TOPCon cells and finer front metallisation that push output to 420 W. A typical 10 kWp villa system needs 24 of them, about 47 m² of roof. The low temperature coefficient of N-type cells (around −0.29 %/°C) partly offsets the extra heat absorbed by the black backsheet, so annual yield in the UAE stays within about 1–2 % of an equivalent white-backsheet module.
The current of about 13 A suits every residential string and hybrid inverter, and the module is fully compatible with optimisers and microinverters rated for 450 W inputs. Check that the frame height (30 mm) matches your clamps — many older clamp sets were sized for 35 or 40 mm frames. Black frames are anodised; avoid abrasive pads during cleaning to keep the finish uniform.
Bifacial dual-glass N-type HPDC module for ground-mount plants, 600–625 W, 23.0 % efficiency.

Monofacial HPBC module for commercial & industrial rooftops, 570–595 W, 22.8 % efficiency.

Residential back-contact rooftop module, 455–485 W, 23.3 % efficiency with anti-shading design.

All-black aesthetic version for premium villas, 445–465 W, 22.5 % efficiency.

Residential HPBC 2.0 back-contact module, 54-cell format, around 480 W with strong partial-shade behaviour.

Rooftop HPBC back-contact module on 182 mm wafers, 415–435 W, around 22 % efficiency.

All-black residential back-contact module with black frame and backsheet, around 420 W.

Premium all-black HPBC 2.0 rooftop module with extended warranty, around 450 W and 23 % efficiency.

N-type TOPCon bifacial dual-glass module, 695–720 W, 23.2 % efficiency. Our utility-scale reference product.