
Between full solar tiles and ordinary on-roof modules sits the in-roof slate module: a larger, low-profile PV panel, roughly the size of four to six slates, that is installed in place of the roof covering with interlocking flashings around it. It gives a flush, clean line on the roof at a lower price per watt than small tiles, with fewer connections per kilowatt and a simpler wiring layout.
Flashing and underlay details decide whether the roof stays dry, so use the matching flashing kit and follow the lap dimensions exactly. As with all in-roof systems, rear ventilation is limited; a ventilated batten gap under the modules helps in hot climates. Typical villa layouts use 60–100 pieces for 6–10 kWp. Specify an inverter with a wide MPPT window, as the lower per-piece voltage means longer strings.
Bifacial dual-glass N-type HPDC module for ground-mount plants, 600–625 W, 23.0 % efficiency.

Monofacial HPBC module for commercial & industrial rooftops, 570–595 W, 22.8 % efficiency.

Residential back-contact rooftop module, 455–485 W, 23.3 % efficiency with anti-shading design.

All-black aesthetic version for premium villas, 445–465 W, 22.5 % efficiency.

Residential HPBC 2.0 back-contact module, 54-cell format, around 480 W with strong partial-shade behaviour.

Rooftop HPBC back-contact module on 182 mm wafers, 415–435 W, around 22 % efficiency.

All-black residential back-contact module with black frame and backsheet, around 420 W.

Premium all-black HPBC 2.0 rooftop module with extended warranty, around 450 W and 23 % efficiency.

N-type TOPCon bifacial dual-glass module, 695–720 W, 23.2 % efficiency. Our utility-scale reference product.