Lesson 7 · 4 min
Tilt & orientation: pointing panels at the sun
A panel catches the most light when the sun hits it straight on. Any angle in between costs power, following the cosine.

Hold a sheet of paper flat under a flashlight, then tilt it. When the light hits it straight on, the paper catches the whole beam. When it is angled, the same paper catches only a narrow slice of the beam. Panels work the same way.
The angle between the incoming sunlight and a line sticking straight out of the panel is called the incidence angle (θ). The share of sunlight the panel catches is cos θ: 0° gives 100%, 30° still gives 87%, 60° gives only 50%.
Small errors cost little, big ones cost a lot. That is why a fixed panel is usually tilted roughly at the site's latitude and faced toward the equator (south in the Gulf, north in Sydney), so it meets the sun well across the whole year.
Try it yourself
Drag the sliders and watch the animation and numbers change.
Worked example
At noon in midwinter in Dubai the sun stands about 41° above the horizon. How much light does a panel tilted at 25° catch, compared with one lying flat?
- θ = |90° − elevation − tilt|
- = |90° − 41° − 25°| = 24°
- output = cos 24° = 0.914 → 91.4%
- flat panel: cos 49° = 0.656 → 65.6%
What this means: The tilted panel catches about 40% more light at that moment than the flat one.
Quick check
Pick an answer to see at once whether it is correct.