
Expansion anchors are quick for light loads; chemical (resin) anchors carry higher tension and suit cracked concrete and edge distances typical of roof parapets. Always clean drilled holes of dust before injecting resin, which is critical on sandy GCC sites.
Full-thread hexagon bolts for structure connections in aluminium and steel racks; supplied in boxes of 100.

M8/M10 stainless flange nut with serrated bearing face that resists loosening from wind vibration; box of 100.

Stainless hammer-head bolt that drops into the rail T-slot and locks with a quarter turn, used with clamps and L-feet.

Tin-plated copper/stainless lay-in lug that connects the rail or module frame to the 4–16 mm² earth conductor.

Stainless washer-type clip with piercing teeth placed under the clamp to bond module frames to the rail.

Stainless M8/M10 flat washers (DIN 125) and split spring washers (DIN 127), box of 200.

M10 × 200 stainless double-thread bolt for fixing through corrugated or fiber-cement roofs into timber or steel purlins.

UV-stable plastic end caps that close rail ends, plus aluminium/stainless blind rivets for flashing and trims; set of 50.

Black UV-stabilized PA66 ties (4.8 × 300 mm) and stainless frame clips for routing DC strings behind modules; pack of 100.