
The drill point cuts its own hole and forms the thread in one operation, so no pre-drilling is needed in steel up to about 5 mm. Use austenitic stainless (SS304/410 bi-metal tip) on coastal roofs; tighten with a depth-setting tool so the EPDM washer compresses without being crushed.
M8/M10 stainless flange nut with serrated bearing face that resists loosening from wind vibration; box of 100.

Stainless hammer-head bolt that drops into the rail T-slot and locks with a quarter turn, used with clamps and L-feet.

Tin-plated copper/stainless lay-in lug that connects the rail or module frame to the 4–16 mm² earth conductor.

Stainless washer-type clip with piercing teeth placed under the clamp to bond module frames to the rail.

Stainless M8/M10 flat washers (DIN 125) and split spring washers (DIN 127), box of 200.

M10 × 200 stainless double-thread bolt for fixing through corrugated or fiber-cement roofs into timber or steel purlins.

UV-stable plastic end caps that close rail ends, plus aluminium/stainless blind rivets for flashing and trims; set of 50.

Black UV-stabilized PA66 ties (4.8 × 300 mm) and stainless frame clips for routing DC strings behind modules; pack of 100.

M12 HDG or stainless anchor for fixing carport columns, inverter frames and rooftop bases to concrete.