
Rack modules slide into a standard 19-inch cabinet, so 4–12 modules (20–60 kWh) fit in a compact footprint with tidy busbar wiring. Each module has its own BMS; one module acts as master and reports the stack status to the inverter via CAN or RS485.
Rack batteries are popular for telecom backup (−48 V DC loads) and for 48 V off-grid and hybrid systems. A cabinet with breaker and busbars is ordered separately.
Higher-capacity 48 V home battery for evening self-consumption and overnight backup of a typical villa.

Modular high-voltage LFP tower (4 × 2.56 kWh) for three-phase hybrid inverters; expandable to 12.8 kWh per tower.

Three 5 kWh modules with module-level optimizers, 100 % usable capacity, for Huawei SUN2000 hybrid inverters.

All-in-one cabinet with LFP battery, PCS, liquid cooling, fire suppression and EMS for peak shaving and solar self-consumption.

Grid-scale LFP storage block with 314 Ah cells in a standard 20-foot container, for solar firming, arbitrage and grid services.

Drop-in lithium replacement for 12 V lead-acid blocks: 1.28 kWh, a third of the weight, 4,000+ cycles — for cabins, boats, caravans, telecom and small off-grid kits.

Sealed VRLA block with carbon-enhanced plates: the low-upfront-cost alternative to lithium, with more cycles than AGM or gel but lower usable depth and heat tolerance than LFP.

Single-cabinet 48 V battery built on 314 Ah prismatic cells — a whole villa's evening and night load in one box for low-voltage hybrid and off-grid inverters.

Plug-together LFP modules in series (about 300–600 V) under one control box — scalable storage for three-phase hybrid inverters in large villas and commercial buildings.