
A 10 kWh battery covers the evening and night-time base load of most villas (lighting, refrigeration, IT, fans and one or two split AC units on a short cycle). It uses 200 Ah LFP cells in a 16S configuration, a 100–200 A BMS and supports up to 1C continuous discharge.
Up to 16 units can be paralleled on one hybrid inverter bus. Check the inverter's battery compatibility list before ordering so the BMS communication protocol matches.
Modular high-voltage LFP tower (4 × 2.56 kWh) for three-phase hybrid inverters; expandable to 12.8 kWh per tower.

Three 5 kWh modules with module-level optimizers, 100 % usable capacity, for Huawei SUN2000 hybrid inverters.

19-inch rack-mount LFP module for server-style battery cabinets in homes, telecom sites and small commercial systems.

All-in-one cabinet with LFP battery, PCS, liquid cooling, fire suppression and EMS for peak shaving and solar self-consumption.

Grid-scale LFP storage block with 314 Ah cells in a standard 20-foot container, for solar firming, arbitrage and grid services.

Drop-in lithium replacement for 12 V lead-acid blocks: 1.28 kWh, a third of the weight, 4,000+ cycles — for cabins, boats, caravans, telecom and small off-grid kits.

Sealed VRLA block with carbon-enhanced plates: the low-upfront-cost alternative to lithium, with more cycles than AGM or gel but lower usable depth and heat tolerance than LFP.

Single-cabinet 48 V battery built on 314 Ah prismatic cells — a whole villa's evening and night load in one box for low-voltage hybrid and off-grid inverters.

Plug-together LFP modules in series (about 300–600 V) under one control box — scalable storage for three-phase hybrid inverters in large villas and commercial buildings.