
Lithium iron phosphate (LiFePO₄, LFP) has become the standard chemistry for stationary storage: it is thermally stable, contains no cobalt and lasts 6,000 cycles or more at 90 % depth of discharge, roughly 15 years of daily cycling. A 51.2 V module is built from 16 prismatic cells in series and managed by a battery management system (BMS) that balances cells and protects against over-current, over-voltage and temperature extremes.
This wall-mounted unit is designed to pair with 48 V hybrid inverters. Several modules can be connected in parallel to reach 10–30 kWh. In hot climates install it indoors or in a shaded, ventilated location: every 10 °C above 25 °C noticeably shortens battery life.
Modular high-voltage LFP tower (4 × 2.56 kWh) for three-phase hybrid inverters; expandable to 12.8 kWh per tower.

Three 5 kWh modules with module-level optimizers, 100 % usable capacity, for Huawei SUN2000 hybrid inverters.

19-inch rack-mount LFP module for server-style battery cabinets in homes, telecom sites and small commercial systems.

All-in-one cabinet with LFP battery, PCS, liquid cooling, fire suppression and EMS for peak shaving and solar self-consumption.

Grid-scale LFP storage block with 314 Ah cells in a standard 20-foot container, for solar firming, arbitrage and grid services.

Drop-in lithium replacement for 12 V lead-acid blocks: 1.28 kWh, a third of the weight, 4,000+ cycles — for cabins, boats, caravans, telecom and small off-grid kits.

Sealed VRLA block with carbon-enhanced plates: the low-upfront-cost alternative to lithium, with more cycles than AGM or gel but lower usable depth and heat tolerance than LFP.

Single-cabinet 48 V battery built on 314 Ah prismatic cells — a whole villa's evening and night load in one box for low-voltage hybrid and off-grid inverters.

Plug-together LFP modules in series (about 300–600 V) under one control box — scalable storage for three-phase hybrid inverters in large villas and commercial buildings.