
A microinverter is mounted under each module (or pair of modules) and converts DC to AC right at the module. Because every module has its own MPPT, shade or soiling on one module does not drag down the others, and the roof carries only safe low-voltage DC, with no high-voltage DC string.
The IQ8HC delivers up to 384 VA and can form a sunlight-only microgrid during outages when paired with an Enphase system controller. Microinverters cost more per watt than string inverters and are generally used for residential roofs below ~15 kWp where design flexibility and module-level monitoring matter most.
Three-phase inverter for large villas and small businesses, with balanced phase output and integrated web monitoring.

Hybrid inverter for homes with low-voltage LFP batteries: solar, battery, grid and generator inputs with automatic backup switching.

Three-phase hybrid for high-voltage batteries, with full backup on all three phases and 150 % DC oversizing.

Six-MPPT commercial inverter for warehouse, factory and carport rooftops, with smart I-V curve diagnosis.

Commercial hybrid inverter for high-voltage battery cabinets: peak shaving, backup and diesel-generator integration for sites with weak grids.

Nine-MPPT workhorse for large rooftops and distributed ground-mount plants, 98.7 % max efficiency.

300 kW / 330 kVA string inverter for utility-scale plants on 1,500 V DC, feeding an 800 V AC medium-voltage skid.

Megawatt-class central inverter for large, uniform utility plants; available as a turnkey MV skid with transformer and switchgear.

All-in-one off-grid inverter-charger with built-in MPPT for remote sites, farms, cabins and telecom shelters.