
ISO 9223 classifies atmospheric corrosivity from C1 (very low) to C5/CX (very high). Inland desert sites in the GCC are usually C3–C4, while coastal and industrial zones along the Gulf reach C5 because of salt spray, humidity and high temperatures. PV structures are expected to last 25–30 years, so the coating must be matched to the site category.
Hot-dip galvanizing (HDG, ISO 1461) dips finished parts in molten zinc, giving a thick (≥80–100 µm) coating that covers cut edges and holes. Zn-Al-Mg (ZAM, e.g. ZM275–ZM430) is applied to the coil before forming; its magnesium and aluminium content slows corrosion about 2–4 times compared with pure zinc at the same thickness, and corrosion products seal cut edges. ZAM is lighter on cost and weight and dominates modern trackers and fixed-tilt racks; HDG remains preferred for heavy sections and C5 sites.
Aluminium (6005-T5/6063-T6) is naturally corrosion-resistant and light, ideal for rooftops but more expensive per tonne and less stiff, so it is rarely used for utility ground mounts. Indicative price shown is per tonne of fabricated cold-formed S350GD–S550GD sections with HDG or ZAM coating, FOB China; actual price follows steel coil markets.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.

Galvanized steel foundation post driven 1.5–2.5 m into the ground, or helical ground screw for rocky/sandy soils. No concrete needed.