
The shaded, warm gap between a rooftop array and the roof is an ideal nesting spot for pigeons. Nests and droppings block drainage, corrode roof sheets, chew cable insulation and create a fire and hygiene risk, while droppings on the glass cause hot spots and soiling losses. A perimeter mesh closes the gap without any drilling into modules or roof.
The kit contains a 30 m roll of 200 mm-high mesh with 12–13 mm openings, made of galvanised steel wire with a black PVC coating for UV and corrosion resistance, plus about 100 stainless or UV-stabilised polymer clips that hook onto the module frame lip. The mesh is cut to length, bent at the bottom to sit on the roof and fastened every 300–400 mm. It is best fitted at installation; retrofit should begin with removing nests and cleaning the roof. Mesh around the full perimeter also keeps wind-blown sand and plastic bags from piling up under the array.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

How to choose structure material and coating for corrosion categories C4 and C5, with an indicative price per tonne of coated cold-formed steel sections.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.