
Working at height is the biggest safety risk in rooftop solar. Where a permanent parapet or guardrail is not practical, a fall-protection system of single anchor points or a horizontal lifeline lets each worker stay attached with a full-body harness and lanyard while cleaning, inspecting or replacing modules. Anchors tested to EN 795 (type A single point, type C lifeline) are designed to arrest a fall and include an energy absorber that limits the force passed into the roof.
The post is 316 stainless steel, typically 300–500 mm high, with a base plate that clamps to standing seams, bolts through trapezoidal sheeting with sealed rivets, or fixes to the concrete slab. Placement follows a roof-safety layout so every work area is reachable within the lanyard length, and anchors are set back from edges to limit swing falls. Installation must be done by trained installers, certified on handover, and inspected at least every 12 months together with the harnesses. Only workers trained in fall protection should use the system.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

How to choose structure material and coating for corrosion categories C4 and C5, with an indicative price per tonne of coated cold-formed steel sections.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.