
A ground screw is a steel tube with a welded helical flight and a pointed tip, driven into the soil by a hydraulic screw driver mounted on a mini-excavator or skid steer. The 76 mm diameter, 1600 mm long size suits fixed-tilt tables and carports on sandy and gravelly soils; longer screws (2–3 m) or 89–114 mm diameters are used for higher loads or weaker ground. Installation torque is logged for every screw and correlates with axial capacity, giving instant quality control without waiting for concrete to cure.
Compared with concrete footings there is no excavation, no formwork, no curing time and almost no spoil — a strong advantage on remote desert sites where water and ready-mix are expensive to bring in. Hot-dip galvanising of 85 µm or more is standard; in saline sabkha soils or high-chloride ground a thicker coating or zinc-aluminium-magnesium finish is specified after a soil-corrosivity test. Always run pull-out and lateral load tests on site before final design: dense caliche layers may need pre-drilling, and loose dune sand may require longer screws.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

How to choose structure material and coating for corrosion categories C4 and C5, with an indicative price per tonne of coated cold-formed steel sections.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.