
On large commercial roofs the O&M crew walks the array dozens of times a year for cleaning, inspection and inverter service. Walking directly on trapezoidal or standing-seam sheeting dents the ribs, breaks the coating and eventually causes leaks; walking on modules is never acceptable and voids most warranties. A dedicated walkway defines the route, spreads the load and keeps people off fragile areas such as skylights.
The walkway is 500–600 mm wide moulded or pultruded GRP grating with a gritted anti-slip surface, carried on aluminium supports clamped to the seams or fixed to the purlin line without penetrating the waterproofing. GRP is non-conductive, does not corrode and stays cooler underfoot than steel in Gulf summers. A guardrail or handrail is added where the walkway runs within 2 m of an unprotected roof edge, and the route should connect roof access points, inverters, combiner boxes and water taps used for cleaning. Price is per linear metre of walkway without handrail.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

How to choose structure material and coating for corrosion categories C4 and C5, with an indicative price per tonne of coated cold-formed steel sections.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.