
Module frame heights have drifted over the years: 40 mm was the norm for 60/72-cell modules, while today's large-format bifacial and TOPCon modules often use 30 mm or 33–35 mm frames. Fixed-height clamps must match the frame exactly, otherwise the clamping force lands on the glass edge or the clamp slips. A universal clamp solves this with a spring-loaded or sliding body that self-adjusts over a 30–40 mm range, and a reversible top piece that turns it from a mid clamp into an end clamp.
The clamp is extruded 6005-T5 aluminium with an A2 stainless M8 bolt and a pre-assembled T-nut or hammer-head nut that drops into the rail channel and locks with a quarter turn. Integrated stainless teeth pierce the anodised frame to bond module and rail for earthing, removing the need for separate bonding clips where the local code accepts it. Tighten to the rail maker's torque, typically 14–16 N·m, and always check that the clamp zone matches the module manufacturer's permitted clamping area (usually the quarter points of the long frame) so the mechanical load rating remains valid.
Steel ground-mount structure for utility and commercial fields: driven piles, rafters and purlins in hot-dip galvanized or Zn-Al-Mg coated steel, priced per kWp.

Heavy-gauge steel carport (single or double cantilever) that shades cars while generating power; per kWp, with optional waterproof decking and EV-charger provisions.
Horizontal single-axis tracker (1P or 2P) that follows the sun east to west for 15–25 % more energy than fixed tilt; with stow mode for sandstorms. Per kWp.

How to choose structure material and coating for corrosion categories C4 and C5, with an indicative price per tonne of coated cold-formed steel sections.

Extruded 6005-T5 anodized rail with T-slot for clamps and roof attachments; sold per meter (standard lengths 4.2 and 5.3 m).

Aluminium mid clamp with hammer-head bolt, fixes two adjacent modules (30–40 mm frames) to the rail, with grounding teeth.

Aluminium end clamp that secures the outer edge of the first and last module in each row.

Aluminium L-foot for trapezoidal metal and flat-seam roofs, with EPDM pad and slotted hole for rail height adjustment.

Adjustable stainless-steel hook that passes under roof tiles and fixes to the rafter, carrying the rail above the tiles.