
An IP65 enclosure is only as tight as its weakest cable entry. Glands to IEC 62444 compress a neoprene or TPE seal around the cable sheath, giving IP68 when correctly sized; each gland covers a narrow clamping range, so one cable per gland and a gland matched to the cable's outer diameter is the rule. UV-stabilised polyamide (black) glands suit most PV boxes; nickel-plated brass glands are used on metal enclosures, near the coast and wherever earthing continuity of an armoured cable is needed (with armour clamping cones). Multi-hole inserts take several small DC cables through one entry, and breather/pressure-equalising glands stop combiner boxes from pumping humid air in and out as they heat and cool each day.
Unused holes must be closed with blanking plugs rated to the same IP. The box holds about 60 pieces from M16 to M63 with lock-nuts; single sizes and armoured-cable glands are available on request.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

IP65 enclosure with gPV string fuses, Type 2 DC surge protection and a load-break isolator, 1000/1500 V DC.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.