
A combiner box (also called a string box or array junction box) parallels several strings into one larger DC feeder. It is essential with central inverters and with string inverters whose inputs are fewer than the number of strings. Each positive (and, for floating systems, negative) string conductor passes through a gPV fuse sized at 1.5–2.4 × the string Isc and below the module's maximum series-fuse rating; the combined output goes through a DC load-break switch and is protected by a Type 2 (or Type 1+2) surge protective device.
Key selection criteria are system voltage (1000 or 1500 V), the number of inputs, output current, ingress protection (IP65/IP66 polycarbonate or glass-fiber-reinforced polyester for outdoor use), and thermal design. In the Gulf, mount combiners in the shade of the module table facing north, use breathable vent plugs to prevent condensation, and derate fuse current for enclosure temperatures that can exceed 60 °C.
Smart combiners add string current monitoring over RS-485/Modbus so strings that underperform because of a blown fuse, damaged cable or heavy soiling are spotted immediately. The listed price is for a standard 12-input 1500 V unit; quantities and configuration are matched to the array layout.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.

Four-pole C-curve MCB/MCCB (10 kA) protecting each inverter's AC output; representative rating for planning.