
When three or more strings are paralleled, IEC 62548 requires overcurrent protection on each string so that a faulted string cannot be back-fed by the others. The gPV fuse does the protecting; the holder makes it practical. A modular DIN-rail holder with a hinged carrier opens to break the circuit (off-load only — always open the DC isolator or wait for zero current first), shows a window or LED indicator when the fuse has blown, and keeps live parts finger-safe to IP20. 10×38 mm holders are rated up to 1000 V DC and 30–32 A; 1500 V utility combiners use longer 10×85 mm fuses.
Match the holder's voltage and current rating to the fuse and the string, check its power-dissipation rating (fuses run warm at high current, and combiner boxes in the sun can exceed 60 °C inside), and leave spacing between holders as the maker requires. Price is per single-pole holder without fuse.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

IP65 enclosure with gPV string fuses, Type 2 DC surge protection and a load-break isolator, 1000/1500 V DC.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.