
Labels are cheap, but missing labels are one of the most frequent reasons a PV installation fails its inspection. IEC 60364-7-712 and IEC 62548, and the utility rules that build on them across the GCC, require warning signs that the installation has two sources of supply, that DC cables remain live in daylight even when the inverter is switched off, the location of DC and AC isolators, and the system's maximum DC voltage and current at the inverter. Where NEC-style rules apply, rapid-shutdown and arc-flash labels are added. Fire services also expect a site plan at the main switchboard showing where the modules, inverters and isolation points are.
The kit contains engraved or printed polyester and aluminium labels with UV-stable inks and a permanent acrylic adhesive rated for outdoor exposure, cable markers for 'PV DC' every few metres along conduits, and blank data plates for string and circuit values. Bilingual English/Arabic versions are available for UAE installations.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

IP65 enclosure with gPV string fuses, Type 2 DC surge protection and a load-break isolator, 1000/1500 V DC.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.