
Installed at the point of connection, the smart meter tells the inverter in real time how much power is flowing to or from the grid. The inverter uses this signal to cap export (where the utility does not allow feed-in), to charge or discharge batteries, and to report true self-consumption.
Small loads use direct-connected meters up to 80 A; larger panels use split-core or solid-core current transformers (CTs) in ratios such as 250/5 A or 600/5 A. Class 1 accuracy (IEC 62053-21) is sufficient for control; revenue metering for net-metering schemes is supplied and sealed by the utility.
Plug-in communication stick that connects a single residential or small commercial inverter to the manufacturer's app.

Thermopile sensor measuring global irradiance (W/m²); the reference for performance-ratio (PR) calculation on bankable plants.

Complete meteorological mast: POA and GHI irradiance, module and ambient temperature, wind, humidity, rain and soiling.

Plant-level supervisory control and grid-code compliance: active/reactive power, voltage and frequency response, alarms and reporting.

Small controller that coordinates PV, battery, EV charger, heat pump and big loads to use more of your own solar power and avoid peak tariffs.

Clip-on current transformers for energy meters, export limiters and monitoring — installed around live cables without disconnecting them.

Measures power at the grid connection and curtails inverters in real time so the site never exports more than the utility allows — zero or a set limit.

Measures voltage, current, power and kWh on PV strings, battery banks or DC loads; RS485 Modbus output for logging.
Row-mounted controller that drives a tracker motor using a solar-position algorithm, backtracking and automatic wind and flood stow.