
Utility plants are built from repeating power blocks, typically 3.3–6.6 MVA each. A power station skid delivers the whole block in one lift: the central inverter (or, for string-inverter plants, an LV AC combiner board), an oil-immersed step-up transformer — commonly 0.63–0.8 / 33 kV with a double LV winding for two inverter halves — the MV ring main unit, an auxiliary transformer and LV panel for tracker and monitoring supplies, and the communication cabinet. Everything is wired, tested and type-certified at the factory, so site work shrinks to setting the skid on its foundation, terminating DC or LV AC cables and the MV ring, and commissioning.
For GCC conditions the critical specifications are ambient rating and cooling: full output up to 45–50 °C with defined derating above, sun shading over the inverter, transformer ONAN rating at the site's design temperature, and ester (K-class) oil where fire separation is tight. Oil containment bunds, IP54/IP65 enclosures with sand filters, C4/C5-M corrosion protection near the coast, and IEC 62271-202 internal-arc tests for the MV compartment are standard requests.
The indicative price covers a 4.4 MVA skid including central inverter, transformer, RMU and auxiliaries, delivered FOB. Foundations, cabling, transport insurance and on-site commissioning are quoted with the project.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

IP65 enclosure with gPV string fuses, Type 2 DC surge protection and a load-break isolator, 1000/1500 V DC.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.