
Where the collector rings of a PV plant come together — at the plant substation or a large commercial point of connection — they terminate in a line-up of MV switchgear panels: one incomer or feeder per ring, plus panels for the auxiliary transformer, capacitor or harmonic filter banks, metering and the bus coupler. Each panel contains a vacuum circuit breaker (typically 1250–2500 A, 25–31.5 kA), current and voltage transformers, earthing switch, cable compartment and a low-voltage compartment with a numerical relay providing overcurrent, earth-fault, directional and under/over-voltage protection plus IEC 61850 communication to the plant SCADA.
Air-insulated switchgear (AIS, IEC 62271-200, withdrawable truck) is cheaper per panel but needs a larger, air-conditioned switchroom. Gas-insulated switchgear (GIS) is compact and sealed against dust and humidity, which makes it attractive on coastal and desert sites where sand ingress and salt mist cause flashovers. Either way, the switchroom in the Gulf must be cooled to the equipment rating (often 40 °C), dust-filtered and fitted with an internal-arc venting path.
The price is indicative per feeder panel with VCB and protection relay; incomers, bus sections and metering panels differ. Protection settings, relay coordination and the utility's interface requirements are finalised in the grid-connection study.
The cross-section used on module leads and short rooftop string runs; 1500 V DC, halogen-free, UV-resistant.

0.6/1 kV copper XLPE-insulated, PVC-sheathed (armored on request) cable linking inverters to the AC distribution board, priced as a representative 5-core 10 mm².

Male + female IP68 PV connectors for 4–6 mm² cable, 1500 V DC, certified to IEC 62852.

Parallels two strings onto one MPPT input or cable: one male (+) and one female (−) branch, 1500 V.

Ratchet crimper with 2.5/4/6 mm² dies, insertion tool, unlocking wrenches and cable stripper.

IP65 enclosure with gPV string fuses, Type 2 DC surge protection and a load-break isolator, 1000/1500 V DC.

Rotary load-break DC switch in an IP66 enclosure for safely isolating strings ahead of the inverter.

10×85 mm photovoltaic fuse link (15–32 A) with DIN-rail fuse holder, rated to IEC 60269-6.

Y-configured MOV surge arrester with thermal disconnect and pluggable modules (In 20 kA, Imax 40 kA) for PV strings.