
A battery's BMS records far more than the state of charge shown on the inverter screen: individual cell voltages and temperatures, charge and discharge throughput, balancing activity and fault flags. Battery analytics software stores this data over years and turns it into practical indicators — state of health (usable capacity compared with new), internal resistance trends, the weakest cells in each rack, and the number of equivalent full cycles already used.
This matters in two situations. In hot climates, a high average temperature accelerates ageing, and analytics show when cooling or operating limits should be changed before capacity is lost. And most storage warranties guarantee a remaining capacity after a number of years or a throughput limit; a claim is only realistic with a continuous data record and a documented capacity test. Degradation forecasts also help plan augmentation for larger systems.
We connect the battery systems, configure alerts and provide quarterly health reports. The indicative price is per site per year for C&I storage; residential batteries can be grouped at a lower rate.
Work orders, ticketing, preventive maintenance plans and spare-parts stock for teams looking after many PV sites.

Engineering service to configure plant SCADA and the power plant controller, map every signal and prove grid-code performance at commissioning.

Hourly energy simulation with meteo data and detailed loss modelling, producing P50/P90 yields and reports that lenders accept.

Array layout, row spacing, string plans, single-line diagrams and cable routing, from first sketch to construction drawings.

Accurate 3D model of a roof or site from a drone survey, used to quantify shading losses before the design is fixed.

Controller and software that coordinate PV, batteries, generator and grid to cut energy cost, respect export limits and keep critical loads running.

Physics-based model of the actual plant that runs alongside it, comparing expected and measured output to locate faults and losses.

Connecting plant data to ERP, BI dashboards, billing systems or the utility over Modbus, IEC 104, MQTT and REST.

Network segmentation, hardened remote access and audits against IEC 62443 for plants and fleets connected to the internet.