
A SCADA server and power plant controller are only as good as their configuration. This service covers the engineering behind them: building the signal list for every inverter, meter, weather station, protection relay and transformer, mapping it over Modbus TCP, IEC 61850 or IEC 60870-5-104, setting up HMI screens, alarm classes and the historian, and establishing the link to the grid operator's control centre. For the hardware itself, see SCADA & power plant controller in Monitoring & control.
The PPC has to be tuned so that active power, reactive power, power factor and voltage set-points are reached within the response times in the grid code, without overshoot or oscillation between inverters. We prepare the test procedure, run the step tests at commissioning and deliver the records the utility requires before it grants permission to operate.
Typical scope also includes time synchronisation, user accounts with role-based access, remote access through a secured gateway, and as-built documentation. The indicative price applies to a plant of roughly 20–50 MW; lead time depends mainly on how quickly equipment suppliers provide their communication data.
Work orders, ticketing, preventive maintenance plans and spare-parts stock for teams looking after many PV sites.

Hourly energy simulation with meteo data and detailed loss modelling, producing P50/P90 yields and reports that lenders accept.

Array layout, row spacing, string plans, single-line diagrams and cable routing, from first sketch to construction drawings.

Accurate 3D model of a roof or site from a drone survey, used to quantify shading losses before the design is fixed.

Controller and software that coordinate PV, batteries, generator and grid to cut energy cost, respect export limits and keep critical loads running.

Cloud analysis of BMS data to track state of health, cell imbalance and degradation, and to build evidence for warranty claims.

Physics-based model of the actual plant that runs alongside it, comparing expected and measured output to locate faults and losses.

Connecting plant data to ERP, BI dashboards, billing systems or the utility over Modbus, IEC 104, MQTT and REST.

Network segmentation, hardened remote access and audits against IEC 62443 for plants and fleets connected to the internet.