
Yield simulation tools of the PVsyst class model a plant hour by hour over a typical meteorological year: irradiance on the tilted or tracked plane, near and far shading, module temperature, soiling, mismatch, cable and transformer losses, inverter clipping and availability. The result is an annual energy figure with a full loss diagram and — combined with long-term irradiance data and its uncertainty — P50, P90 and P99 values that banks and investors use to size debt.
In the Gulf, the inputs that move the result most are soiling assumptions, module temperature (which depends on wind and mounting type), bifacial gain over sand or gravel, and the choice of irradiance database; differences of 3–5% between databases are not unusual. A credible report states every assumption so that a reviewer can check it.
We can supply simulation software licences for in-house engineering teams, or run the study ourselves and deliver a report for a tender, a lender or an internal investment decision. The indicative price is per licence; independent studies are quoted per project.
Work orders, ticketing, preventive maintenance plans and spare-parts stock for teams looking after many PV sites.

Engineering service to configure plant SCADA and the power plant controller, map every signal and prove grid-code performance at commissioning.

Array layout, row spacing, string plans, single-line diagrams and cable routing, from first sketch to construction drawings.

Accurate 3D model of a roof or site from a drone survey, used to quantify shading losses before the design is fixed.

Controller and software that coordinate PV, batteries, generator and grid to cut energy cost, respect export limits and keep critical loads running.

Cloud analysis of BMS data to track state of health, cell imbalance and degradation, and to build evidence for warranty claims.

Physics-based model of the actual plant that runs alongside it, comparing expected and measured output to locate faults and losses.

Connecting plant data to ERP, BI dashboards, billing systems or the utility over Modbus, IEC 104, MQTT and REST.

Network segmentation, hardened remote access and audits against IEC 62443 for plants and fleets connected to the internet.