
A digital twin is a detailed model of one specific plant — its exact layout, module and inverter types, string configuration, cable lengths and terrain — fed every few minutes with measured irradiance, temperature and wind. It calculates what each inverter, or even each string, should be producing at that moment. The gap between expected and actual output is the useful signal: it separates real faults from weather and puts a figure on losses in energy and money.
Compared with simple performance-ratio monitoring, model-based detection finds slow problems such as progressive soiling, a degraded string, tracker misalignment or inverter derating due to heat, and does so without waiting for a monthly report. The same model can be used to test changes before they are made: a new cleaning schedule, re-stringing or a repowering option.
Building a twin requires as-built drawings, equipment datasheets and reliable sensor data; part of the work is often checking and recalibrating pyranometers. The indicative price covers building and calibrating the model for a plant up to about 20 MW; running it on a subscription is quoted separately.
Work orders, ticketing, preventive maintenance plans and spare-parts stock for teams looking after many PV sites.

Engineering service to configure plant SCADA and the power plant controller, map every signal and prove grid-code performance at commissioning.

Hourly energy simulation with meteo data and detailed loss modelling, producing P50/P90 yields and reports that lenders accept.

Array layout, row spacing, string plans, single-line diagrams and cable routing, from first sketch to construction drawings.

Accurate 3D model of a roof or site from a drone survey, used to quantify shading losses before the design is fixed.

Controller and software that coordinate PV, batteries, generator and grid to cut energy cost, respect export limits and keep critical loads running.

Cloud analysis of BMS data to track state of health, cell imbalance and degradation, and to build evidence for warranty claims.

Connecting plant data to ERP, BI dashboards, billing systems or the utility over Modbus, IEC 104, MQTT and REST.

Network segmentation, hardened remote access and audits against IEC 62443 for plants and fleets connected to the internet.