
Every inverter, logger and SCADA server that can be reached remotely is also a potential way in. Many sites still run with default passwords, flat networks where office laptops and inverters share one subnet, and remote-desktop ports left open to the internet for a contractor's convenience. Grid operators increasingly expect generators to demonstrate basic controls, and a compromised plant can be switched off or used as a route into other systems.
Work in this area follows the IEC 62443 approach: an inventory of assets and connections; zones and conduits that separate the control network from IT and the internet; firewalls with explicit rules; a single remote-access gateway with multi-factor authentication and logging; removal of default credentials; and a plan for patching and backups. The audit report ranks findings by risk so they can be fixed in a sensible order.
We offer assessments of existing sites, secure network design for new ones, and implementation. The indicative price covers an assessment and remediation plan for one utility-scale plant or a group of C&I sites; hardware such as industrial firewalls is quoted separately.
Work orders, ticketing, preventive maintenance plans and spare-parts stock for teams looking after many PV sites.

Engineering service to configure plant SCADA and the power plant controller, map every signal and prove grid-code performance at commissioning.

Hourly energy simulation with meteo data and detailed loss modelling, producing P50/P90 yields and reports that lenders accept.

Array layout, row spacing, string plans, single-line diagrams and cable routing, from first sketch to construction drawings.

Accurate 3D model of a roof or site from a drone survey, used to quantify shading losses before the design is fixed.

Controller and software that coordinate PV, batteries, generator and grid to cut energy cost, respect export limits and keep critical loads running.

Cloud analysis of BMS data to track state of health, cell imbalance and degradation, and to build evidence for warranty claims.

Physics-based model of the actual plant that runs alongside it, comparing expected and measured output to locate faults and losses.

Connecting plant data to ERP, BI dashboards, billing systems or the utility over Modbus, IEC 104, MQTT and REST.