
A 12 V kit is the simplest stand-alone solar system: panels charge a battery through a charge controller, and an inverter converts battery DC to 230 V AC. With 400 W of panels and roughly 5.5–6 peak sun hours typical of the Gulf, the array delivers about 1.6–1.9 kWh per day after controller and temperature losses. The 100 Ah LFP battery stores 1.28 kWh, of which around 1.1 kWh is usable — enough for LED lighting, phone and laptop charging, a 12 V compressor fridge, a fan and a router, with one night of autonomy.
The kit includes the parts installers usually forget: a battery fuse (ANL or MRBF) within 30 cm of the positive terminal, a DC breaker between controller and panels, 6 mm² PV cable with MC4 connectors and 25–35 mm² battery cables for the inverter. At 12 V, a 1 kW inverter draws over 90 A from the battery, which is why 12 V systems stop being practical above roughly 1.5–2 kW — move to 24 V or 48 V for larger loads.
The two panels are wired in series (around 45 V Voc) into the MPPT controller, which keeps PV cable losses low and leaves room to add a third panel. Inverters of this size cannot start air conditioners, water heaters or kettles; for those loads, see the 24 V kit or a hybrid inverter system.
Wheeled LFP power unit with 3.6 kW inverter, dual MPPT inputs and add-on battery packs up to about 20 kWh: home backup with no installer needed.

ETFE-laminated monocrystalline panel that folds into a briefcase with kickstands. Connects to power stations through an MC4 or XT60 adaptor.

Cabin, farm or remote-site package: 1.5 kWp of modules, an all-in-one 3 kW inverter with built-in MPPT and charger, 25.6 V 200 Ah LFP, mounting and wiring.

Low-cost controller for small 12/24 V systems with panels matched to battery voltage; LCD, USB outputs and selectable lead-acid or lithium profiles.

Tracks the panel's maximum power point and converts excess voltage into charging current. Handles up to 3.2 kW of PV at 48 V, with Bluetooth monitoring and lithium profiles.

Heavy-duty controller for 48 V battery banks up to 5.8 kW of PV, with longer strings, parallel operation and network monitoring for farms, telecom and remote sites.

Charges a vehicle or boat house battery from the alternator and roof panels at the same time, with the correct lithium profile and starter-battery protection.

Transformer-based inverter with 3× surge capacity for motors, pumps and compressors, a built-in battery charger and automatic transfer from grid or generator.

Panel, LFP battery, controller, LED head and motion sensor in one housing for 6–8 m poles. Lights roads, compounds and car parks with no trenching or grid connection.