
The larger class of portable units sits between a camping power station and a fixed hybrid inverter system. A base unit holds about 3.6 kWh of LFP cells and a 3.6 kW pure-sine inverter (7 kW surge), switchable between 120 V and 230 V output on many models, and accepts up to 2–3 kW of solar on two independent MPPT inputs. Expansion packs of 3–5 kWh plug in by cable, taking total storage to roughly 15–20 kWh, and some models can be paralleled for split-phase or higher power.
With a transfer switch or a dedicated home-backup panel wired by an electrician, the unit can feed selected circuits — lights, fridge, routers, fans and a small inverter air conditioner — during outages. As a rule of thumb, a 1.5 kW inverter split AC on duty cycle draws 8–10 kWh in a hot Gulf day, so air conditioning needs expansion batteries and a sizeable solar input. For essentials only (around 3–4 kWh per day), the base unit plus 2 kWp of panels is self-sufficient in most months.
Compared with a fixed hybrid system, these units cost more per kWh and cannot export to the grid, but they need no permit for plug-in use, move with the owner and double as job-site power. Check the AC charging rate (fast units refill in under 2 hours), the generator-input option for cloudy stretches, and the rated operating temperature before buying.
ETFE-laminated monocrystalline panel that folds into a briefcase with kickstands. Connects to power stations through an MC4 or XT60 adaptor.

Complete small system for cabins, kiosks, campers and farm huts: 2 × 200 W panels, 30 A MPPT, 12.8 V 100 Ah LFP battery, 1 kW pure-sine inverter, cables and fuses.

Cabin, farm or remote-site package: 1.5 kWp of modules, an all-in-one 3 kW inverter with built-in MPPT and charger, 25.6 V 200 Ah LFP, mounting and wiring.

Low-cost controller for small 12/24 V systems with panels matched to battery voltage; LCD, USB outputs and selectable lead-acid or lithium profiles.

Tracks the panel's maximum power point and converts excess voltage into charging current. Handles up to 3.2 kW of PV at 48 V, with Bluetooth monitoring and lithium profiles.

Heavy-duty controller for 48 V battery banks up to 5.8 kW of PV, with longer strings, parallel operation and network monitoring for farms, telecom and remote sites.

Charges a vehicle or boat house battery from the alternator and roof panels at the same time, with the correct lithium profile and starter-battery protection.

Transformer-based inverter with 3× surge capacity for motors, pumps and compressors, a built-in battery charger and automatic transfer from grid or generator.

Panel, LFP battery, controller, LED head and motion sensor in one housing for 6–8 m poles. Lights roads, compounds and car parks with no trenching or grid connection.