
PV arrays cannot be switched off while the sun shines: strings stay energized up to 1500 V DC, and DC arcs do not self-extinguish like AC arcs. The kit (8 cal/cm² arc-rated coverall, arc-rated face shield with hard hat, Class 0 (1000 V AC / 1500 V DC) rubber insulating gloves with leather protectors, and EH-rated safety boots) meets NFPA 70E Category 2 and IEC 61482 for routine switching, measurement and inverter maintenance. Light, breathable fabrics are chosen for summer heat; gloves must be air-tested before each use and dielectric-tested every six months.
Battery-powered rotating brush on a telescopic pole for rooftops and small plants; optional water connection.

Field instrument that measures the full current-voltage curve of a string and compares it with the datasheet at STC.

Aerial infrared survey that detects hot spots, failed diodes, disconnected strings and cracked modules across an entire plant in hours.

CAT III 1500 V kit: insulation resistance, Voc, Isc, polarity, earth continuity and DC clamp current for commissioning and fault-finding.

Optional nano-coating applied on site that reduces dust adhesion and makes cleaning easier; lasts 1–3 years.

Pair of glass-fibre reinforced spanners for tightening MC4 cable glands and releasing the locking latches without damaging the housing.

Pocket meter reading plane-of-array irradiance in W/m² and module back-sheet temperature — the quick reference for commissioning and performance checks.

Radiometric infrared camera for finding hot cells, failed bypass diodes, loose terminals and overheated fuses in modules, combiner boxes and switchboards.

Measures earth electrode resistance and soil resistivity with stakes, plus stakeless clamp testing of individual rods in a meshed earthing system.