Solar Library·357 items
Modules, inverters, batteries, structures, cables, hardware and services, with plain explanations, full specifications and indicative USD prices.
Use ↑ ↓ to move, Enter to open

Autonomous microfiber-brush robot that cleans a full table row every night without water; the standard for desert utility plants.

Battery-powered rotating brush on a telescopic pole for rooftops and small plants; optional water connection.

Field instrument that measures the full current-voltage curve of a string and compares it with the datasheet at STC.

Aerial infrared survey that detects hot spots, failed diodes, disconnected strings and cracked modules across an entire plant in hours.

CAT III 1500 V kit: insulation resistance, Voc, Isc, polarity, earth continuity and DC clamp current for commissioning and fault-finding.

Arc-rated clothing, face shield, insulated gloves and safety footwear for work on live PV DC and LV AC equipment.

Optional nano-coating applied on site that reduces dust adhesion and makes cleaning easier; lasts 1–3 years.

Pair of glass-fibre reinforced spanners for tightening MC4 cable glands and releasing the locking latches without damaging the housing.

Pocket meter reading plane-of-array irradiance in W/m² and module back-sheet temperature — the quick reference for commissioning and performance checks.

Radiometric infrared camera for finding hot cells, failed bypass diodes, loose terminals and overheated fuses in modules, combiner boxes and switchboards.

Measures earth electrode resistance and soil resistivity with stakes, plus stakeless clamp testing of individual rods in a meshed earthing system.

Adjustable 3/8" click wrench with hex, Torx and socket bits for module clamps, rail bolts and terminal screws — tightened to the value on the datasheet, not by feel.

True-RMS clamp meter rated CAT III 1500 V DC for measuring string currents and voltages without breaking the circuit.

EN 361 harness with dorsal and sternal D-rings and a twin-leg EN 355 shock-absorbing lanyard for rooftop and carport work.

IEC 60903 class 0 rubber gloves for work up to 1000 V AC / 1500 V DC, worn under leather over-gloves that protect them from cuts and abrasion.

Vented safety helmet with four-point chin strap, anti-fog UV400 glasses and an evaporative neck wrap — basic daily PPE for desert solar sites.

Carbon-fibre telescopic pole with a soft-bristle brush and water feed for cleaning rooftop and carport arrays from the ground or a walkway.

Trailer- or skid-mounted reverse-osmosis and deionisation unit with tank, pump and hose reels, producing spot-free water below 10 ppm TDS from tanker or well water.