
Groundwater and tanker water in the Gulf often carry 1,000–5,000 ppm of dissolved salts. Washing modules with it leaves a white mineral film that cuts output and, over time, can etch the anti-reflective coating — many module manufacturers specify low-mineral water in their cleaning instructions. This mobile unit pre-filters sediment, removes roughly 95–98 % of salts in a reverse-osmosis stage and polishes the permeate through mixed-bed deionisation resin, delivering water below 10 ppm TDS that dries spot-free.
A typical configuration has a 1,000–2,000 L product tank, a generator or grid connection, a booster pump and two 50 m hose reels feeding water-fed poles or a tractor-mounted brush. Output of around 500–1,000 L/h is enough for crews washing a few megawatts per day. Plan for brine disposal (the RO stage rejects 30–50 % of the feed water), track the conductivity meter on the outlet and change DI resin when it rises, and schedule washes in the early morning to save water and avoid thermal stress on hot glass.
Battery-powered rotating brush on a telescopic pole for rooftops and small plants; optional water connection.

Field instrument that measures the full current-voltage curve of a string and compares it with the datasheet at STC.

Aerial infrared survey that detects hot spots, failed diodes, disconnected strings and cracked modules across an entire plant in hours.

CAT III 1500 V kit: insulation resistance, Voc, Isc, polarity, earth continuity and DC clamp current for commissioning and fault-finding.

Arc-rated clothing, face shield, insulated gloves and safety footwear for work on live PV DC and LV AC equipment.

Optional nano-coating applied on site that reduces dust adhesion and makes cleaning easier; lasts 1–3 years.

Pair of glass-fibre reinforced spanners for tightening MC4 cable glands and releasing the locking latches without damaging the housing.

Pocket meter reading plane-of-array irradiance in W/m² and module back-sheet temperature — the quick reference for commissioning and performance checks.

Radiometric infrared camera for finding hot cells, failed bypass diodes, loose terminals and overheated fuses in modules, combiner boxes and switchboards.