
Earthing keeps module frames, structures and inverter enclosures at a safe potential and gives lightning and surge currents a low-impedance path to ground. Design targets are often 1–10 Ω depending on the utility and the lightning protection design, and dry desert sand can make those numbers hard to reach. The tester injects a test current between the electrode and an auxiliary stake and measures voltage at a potential stake (fall-of-potential, 3-pole), while the 4-pole Wenner method gives soil resistivity for designing the earth grid before construction.
The clamp method induces a current in a closed earth loop, so a single rod in a bonded system can be checked without disconnecting it — useful on large plants with hundreds of rods. Measure after construction for the handover file and then annually, preferably at the end of the dry season when readings are highest. Rising values point to corroded connections, stolen or broken conductors, or a rod that has lost soil contact; record the date, weather and method every time so trends are comparable.
Battery-powered rotating brush on a telescopic pole for rooftops and small plants; optional water connection.

Field instrument that measures the full current-voltage curve of a string and compares it with the datasheet at STC.

Aerial infrared survey that detects hot spots, failed diodes, disconnected strings and cracked modules across an entire plant in hours.

CAT III 1500 V kit: insulation resistance, Voc, Isc, polarity, earth continuity and DC clamp current for commissioning and fault-finding.

Arc-rated clothing, face shield, insulated gloves and safety footwear for work on live PV DC and LV AC equipment.

Optional nano-coating applied on site that reduces dust adhesion and makes cleaning easier; lasts 1–3 years.

Pair of glass-fibre reinforced spanners for tightening MC4 cable glands and releasing the locking latches without damaging the housing.

Pocket meter reading plane-of-array irradiance in W/m² and module back-sheet temperature — the quick reference for commissioning and performance checks.

Radiometric infrared camera for finding hot cells, failed bypass diodes, loose terminals and overheated fuses in modules, combiner boxes and switchboards.