
Remote ground-mount plants, farms, pumping stations and many commercial rooftops have no reliable building network for the logger. An industrial 4G router provides that link with hardware built for a hot cabinet: metal housing, operating range typically −40 to +75 °C, wide 9–36 V DC input, dual SIM failover and a hardware watchdog that restarts the modem if the connection hangs.
The router connects the data logger, inverters and meters over its Ethernet ports and can also act as a Modbus RTU-to-TCP gateway on its RS485 port. Built-in VPN (OpenVPN, IPsec or WireGuard) lets the O&M team reach inverter web pages and loggers securely without exposing them to the public internet, which also satisfies utility and client cyber-security requirements. Data usage for a typical commercial site is 300 MB–1 GB per month.
Fit an external antenna on the cabinet roof when the cabinet is metal or signal is weak, and use a data SIM with a static or private APN where the network operator offers one.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.