Solar Library·357 items
Modules, inverters, batteries, structures, cables, hardware and services, with plain explanations, full specifications and indicative USD prices.
Use ↑ ↓ to move, Enter to open

Replacement main control board for string and hybrid inverters, handling measurement, MPPT, grid synchronisation, protection and communication.

Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.

Schottky bypass diodes for PV junction boxes that route current around shaded or damaged cell groups and prevent hot spots.

Isolated, high-accuracy current transducer for inverter control loops and BMS, measuring DC and AC with fast response.

Clip-on CT for energy meters, export-limitation and consumption monitoring, installed without disconnecting the cable.

Precision manganin shunt for battery current measurement, battery monitors and DC metering in off-grid and storage systems.

Galvanically isolated converter that supplies 12 V auxiliary loads such as controllers, routers and relays from a 48 V battery bank.

Galvanically isolated RS485 transceiver and converter module for reliable inverter, meter and logger communication over long cable runs.

Isolated CAN interface and protocol converter that links lithium battery BMS units with hybrid inverters and PCS.

DIN-rail cellular router with Ethernet, RS485 and VPN for remote monitoring and maintenance of solar and storage sites without fixed internet.

Low-power long-range radio module for wireless tracker controllers, string monitors and environmental sensors across large PV fields.

Wired alternative to Wi-Fi and 4G monitoring sticks: plugs into the inverter's COM port and uploads data over a LAN cable.

Assorted board-level fuses and polymer PTC resettable fuses for repairing inverter, controller and BMS circuit boards.

Plug-in varistor module that restores a DC Type 2 SPD after its status window turns red, without rewiring the base.

Sealed, speed-controlled DC fan for inverter heat sinks and battery cabinets, built for dust, humidity and high ambient temperature.

Extruded 6063 aluminium heat sink profiles, cut and machined to length, for IGBT modules, MOSFETs, rectifiers and DC-DC converters.

Epoxy-encapsulated 10 kΩ NTC thermistors on ring terminals for BMS cell and busbar temperature measurement.

Aluminium-case lithium iron phosphate cell for 12–48 V residential, telecom and mobility batteries, supplied graded and matched.

Large-format storage cell (896 Wh) used in 48 V wall and rack batteries and in commercial ESS cabinets.

Long-life storage cell (1.0 kWh) in the same footprint as 280 Ah, rated 8,000+ cycles for daily-cycling commercial and utility ESS.

Nickel-plated copper or aluminium busbars for bolted or laser-welded series connection of prismatic LFP cells.

Weatherproof polycarbonate/ABS or powder-coated steel enclosure for controllers, BMS, routers and data loggers on rooftops and in the field.

Plug-on dual-channel driver with isolated supply, desaturation protection and soft shut-down for half-bridge power modules.