
Wi-Fi monitoring sticks are convenient but often unreliable in practice: inverters mounted in plant rooms, basements or behind concrete walls lose signal, and every change of router or password breaks the connection. Where a network cable can be run to the inverter, a LAN dongle removes those problems. It plugs into the same COM port as the wireless stick, takes its address by DHCP, and sends production and fault data to the inverter's monitoring platform through the building network.
Wired connection is also preferred by many commercial clients whose IT policies do not allow unknown wireless devices, and it is more stable for sites that use the inverter's own export-limitation or remote power-control functions. Cat 5e or Cat 6 cable can run up to 100 m; beyond that, or between buildings, use a switch or fibre converter. Order the dongle to match the inverter series and port type, and note that most units are designed for indoor or sheltered locations; use a cable gland and keep the port cap sealed outdoors.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.