
The module contains two IGBT switches with fast-recovery freewheeling diodes, arranged as one phase leg, on an insulated copper baseplate. With a 1200 V blocking rating it suits DC buses up to about 800–850 V in two-level topologies, and it is the usual building block in 100 kW-class PCS units, central inverter phase legs and battery-storage DC/DC stages. Trench field-stop chips give a typical VCE(sat) of 1.7–2.0 V at rated current and switching frequencies up to around 20 kHz.
When replacing a failed module, use the same voltage class, current rating and package outline, and replace all modules in a damaged leg rather than one. Apply a thin, even layer of thermal paste, torque the mounting and terminal screws to the values in the datasheet, and check the gate driver before power-up: a shorted driver output is a frequent root cause of IGBT failure. The modules are electrostatic-sensitive and ship with gate shorting clips that should be removed only after mounting.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.

Schottky bypass diodes for PV junction boxes that route current around shaded or damaged cell groups and prevent hot spots.