
A standard module has three bypass diodes, each across a group of 20–24 half-cells. When one cell is shaded or cracked, it can no longer pass the string current; the other cells then drive it into reverse bias and it dissipates their power as heat. Without a bypass path that cell can exceed 100 °C, discolouring the encapsulant, burning the backsheet and in extreme cases starting a fire. The bypass diode turns on as soon as its cell group goes negative, carrying the current around it at a loss of only about 0.4–0.5 V and the output of that one group.
Schottky diodes are used for their low forward voltage, which keeps junction-box temperature down during long shading periods. Current rating must exceed the module's short-circuit current with margin: 15 A for older modules, 25–30 A for today's high-current bifacial types. A failed diode usually fails short, cutting module voltage by one third, which shows up as a low-voltage string in monitoring or in an I-V curve test. Sold in bags of 100 pieces; SMD and axial packages to match the junction box.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.