
A DC Type 2 surge protective device is built as a fixed base and plug-in protection modules containing metal-oxide varistors with a thermal disconnector. Each surge it diverts ages the varistor slightly; a large nearby strike, or long-term degradation, eventually triggers the disconnector and the module's indicator window changes from green to red. The SPD then no longer protects that pole, even though the system keeps working, which is why the indicator should be part of every routine inspection.
The cartridge simply pulls out of the base and a new one pushes in; no tools or rewiring are needed, though the DC isolator should be opened first for safety. The replacement must match the base and the original module exactly: maximum continuous operating voltage (Ucpv), nominal and maximum discharge current (In/Imax) and whether it is a pole or earth module. In a Y-configuration 1000 V SPD, for example, each module carries a lower voltage rating than the system voltage. If a module turns red repeatedly, check the earthing and bonding of the array and consider Type 1+2 protection.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.