
Retrofitting monitoring or export limitation to an existing building rarely allows the main cable to be disconnected. A split-core CT opens on a hinge or detachable bar and closes around the conductor, so it can be fitted in minutes on a live but safely insulated cable. The CT feeds a smart meter or the inverter's metering input, which then controls battery charging and export to the grid in real time.
Two output types are common: 5 A or 1 A secondary for standard meters and protection relays, and low-voltage output (333 mV or 1 V at rated current) that is safe to leave open-circuit and connects directly to most inverter meters. Check which the meter expects before ordering. Accuracy is typically class 1 for monitoring and class 0.5 for billing-grade sub-metering. Choose the aperture to suit the cable or busbar, the rating close to the expected maximum current, and install every CT with the arrow pointing towards the load; a reversed CT is the most common cause of a system that exports when it should be importing.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.