
Busbars carry the full pack current between cells, so their cross-section, material and contact surface decide how much heat is generated at every joint. A set covers a 16S pack: 15 series links plus terminal pieces, sized for the cell pitch and stud size. Nickel-plated copper is the usual choice for bolted packs because it combines low resistance with a corrosion-resistant, stable contact surface. Aluminium busbars are lighter and match aluminium cell terminals for laser welding, avoiding galvanic corrosion at the weld.
For 280–314 Ah cells, flexible laminated copper (multiple thin layers with a formed loop) is preferred over solid bars, as it absorbs cell swelling and vibration without loading the terminals. A typical solid copper link of 2 × 20 mm carries about 200 A in a pack environment; laminated links are rated similarly by cross-section.
Clean cell terminals before assembly, use the correct torque and spring or serrated washers, and re-check torque after the first few weeks of cycling. Insulating covers and NTC sensor positions can be supplied with the set.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.