
Running communication cable to thousands of tracker controllers or sensors across a utility plant is costly and vulnerable to lightning and trenching damage. LoRa uses chirp spread-spectrum modulation, which trades data rate for range and noise immunity: a few kilobits per second is plenty for tracker angles, motor status, wind stow commands or soil and module temperatures, and a single gateway can cover 2–5 km in open desert terrain.
The module is a compact radio with an SPI or UART interface, transmit power up to about 20 dBm and receive sensitivity better than −135 dBm, drawing microamps in sleep so it can run from a small panel-and-battery supply on each tracker row. Select the frequency band permitted by the local regulator (in the UAE this is set by the TDRA; 868 MHz-band variants are generally used in the region) and the matching antenna. For safety-related commands such as wind stow, design the network with a fallback: trackers should move to stow automatically if they lose contact with the gateway.
Power-stage board carrying the boost and inverter bridges, gate drivers and DC-link capacitors. The major spare most often needed after surge or overheating damage.

Assembled MPPT buck-converter board with automatic 12/24/48 V battery detection, for off-grid controller builds and repairs.

Battery management board for 48 V-class LFP packs with cell monitoring, MOSFET switching, passive balancing and CAN/RS485 inverter communication.

Capacitive or inductive energy-transfer balancer that moves charge between cells continuously, keeping large LFP packs aligned.

Industry-standard 62 mm half-bridge IGBT module with anti-parallel diodes, used in central and large string inverters, PCS and motor drives.

Silicon-carbide half-bridge module for high-frequency, high-efficiency inverters, DC/DC stages and fast chargers.

Self-healing metallised-polypropylene capacitor for inverter DC buses, with high ripple-current rating and long life at elevated temperature.

Sealed, gas-filled DC contactor for battery racks, PCS and high-voltage battery packs, with magnetic arc blow-out and auxiliary contact.

PCB-mount power relay used as the AC output disconnect in string and hybrid inverters, with wide contact gap for grid-code isolation.