
A transparent backsheet replaces the rear glass of a bifacial module with a clear, UV-stabilised polymer laminate, usually a PET core with transparent fluorinated coatings. The module keeps most of its rear-side gain while weighing roughly 20–25 % less than an equivalent dual-glass design and using a lighter frame. Some versions print a white grid between cells to reflect light back, much like glazed rear glass.
The polymer must stay clear for decades, so yellowing resistance under UV and heat, along with water-vapour barrier and partial-discharge performance, are the critical tests. Moisture ingress is higher than with glass, so pair it with POE or EPE when using N-type cells and verify the combination in damp-heat and UV sequences. It suits commercial rooftops with limited load capacity and carports where weight matters more than the last bit of long-term reliability.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.