
A heterojunction cell coats both sides of a thin N-type wafer with intrinsic and doped hydrogenated amorphous silicon, then a transparent conductive oxide such as ITO. The process is short, with only a handful of steps, and stays below about 200 °C, which suits wafers of 110–120 µm. Mass-production efficiency is around 25.5–26.5 %, bifaciality 85–90 %, and the temperature coefficient roughly −0.24 to −0.26 %/°C, the best of the mainstream options for hot climates.
The low-temperature layers set the rules for module assembly. HJT uses low-temperature silver or silver-coated copper paste, so stringing needs low-melting-point ribbon, conductive adhesive or 0BB wire with film, and lamination temperatures must stay within the cell maker's window. The amorphous layers dislike moisture and UV; POE or EPE encapsulant and dual-glass construction are standard. Order with matching ribbon and encapsulant specifications, and request EL, IV and colour binning for every lot.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.

Low-iron patterned front glass, fully tempered with anti-reflective coating and about 94 % transmittance, for glass-backsheet modules.