
Solar glass is rolled, not floated: molten low-iron glass passes between patterned rollers that give one face a light texture to trap light and help adhesion to the encapsulant. Iron content is kept very low so the glass does not absorb near-infrared light. After cutting and edging to module size, a porous silica anti-reflective coating is applied and the sheet is fully tempered, which brings solar transmittance across 380–1100 nm to about 94 %.
At 3.2 mm, fully tempered glass gives glass-backsheet modules the stiffness and hail resistance they need, as the glass carries most of the mechanical load. Check flatness and bow (important for lamination yield), coating uniformity and abrasion resistance, fragmentation count, and edge quality. In sandy, high-UV climates, AR coating durability is worth testing: ask for results after damp-heat and abrasion cycles. Supplied cut to the customer's module dimensions, packed in wooden crates with interleaving.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.