
The G12R (also called 210R) wafer keeps the 182.2 mm width of M10 but extends the length to 210 mm. Cut in half, it gives cells that pack neatly into the 2382 × 1134 mm module, which the industry settled on as a standard size for utility and commercial products. A 66-cell (132 half-cell) TOPCon module on this wafer typically reaches 610–630 W while staying within the same frame width and pallet footprint that installers and trackers already handle.
Thickness is usually 130 µm for TOPCon. Because the wafer is rectangular, cell-line carriers, printing screens and stringer tooling must be set up for the 210R format; check compatibility before switching from M10. Quality checks are the same as for other N-type wafers: thickness variation, edge integrity, resistivity, lifetime and surface condition.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.

Low-iron patterned front glass, fully tempered with anti-reflective coating and about 94 % transmittance, for glass-backsheet modules.