
TOPCon (tunnel oxide passivated contact) places an ultra-thin silicon oxide layer, about 1.5 nm, under a phosphorus-doped polysilicon film on the rear of an N-type wafer. This contact passivates the surface while still letting current through, and the front carries a boron emitter passivated with aluminium oxide. Laser-enhanced contact firing has pushed mass-production efficiency to around 26 %, giving roughly 8.6–8.8 W per M10-format cell.
TOPCon runs on lines derived from PERC, which is why it now accounts for most of the world's cell output. Typical metallisation is 16–20 busbars or 0BB, so match the cell to your stringer before ordering. The cells are more sensitive to moisture, acetic acid and UV than PERC: pair them with POE or EPE encapsulant rather than plain EVA, and prefer dual-glass or a low-permeability backsheet. Temperature coefficient is about −0.29 to −0.30 %/°C, a real gain in Gulf heat. Supplied binned by efficiency and colour with EL and IV data.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.

Low-iron patterned front glass, fully tempered with anti-reflective coating and about 94 % transmittance, for glass-backsheet modules.