
M10 started as a 182 × 182 mm square wafer and has since been stretched slightly to 182.2 × 183.75 mm, which adds usable area without changing cell-line tooling. It remains a common format for 54-, 66- and 72-half-cell module layouts, so it suits assemblers who want flexibility across residential and commercial products.
Wafers are sliced with tungsten- or steel-core diamond wire of roughly 30–35 µm, which keeps kerf loss low and allows thicknesses around 130 µm for TOPCon (thinner for HJT). Incoming inspection usually covers thickness and total thickness variation, edge chips, saw marks, bow, resistivity and lifetime, and the corner chamfer that confirms the wafer was cut from the round ingot.
Thin wafers break easily: keep them in their original boxes, handle with suction or Bernoulli grippers rather than tweezers, and store them dry and at stable temperature. Priced per piece, packed in sealed cartons.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.

Low-iron patterned front glass, fully tempered with anti-reflective coating and about 94 % transmittance, for glass-backsheet modules.